2019 Equinox Headlight Bulb Size: A Comprehensive Guide and Replacement Steps

2019 Equinox Headlight Bulb Size: A Comprehensive Guide

Introduction

The 2019 Equinox is a popular crossover SUV manufactured by Chevrolet. Like any other vehicle, it requires proper maintenance and occasional replacement of certain parts. One such part is the headlight bulb, which may need to be replaced if it burns out or becomes damaged. In this article, we will provide you with the necessary information about the headlight bulb size for the 2019 Equinox.

Headlight Bulb Size Table

To make things easier for you, we have compiled a table that lists the headlight bulb sizes for the 2019 Equinox. Please note that this information is based on the standard factory specifications, and there may be variations depending on the specific trim level or optional packages.

Headlight Type Bulb Size
Low Beam H11
High Beam 9005
Front Turn Signal 7444NA
Front Side Marker 194
Front Parking Light 194

Steps to Replace the Headlight Bulb

If you need to replace the headlight bulb on your 2019 Equinox, follow these simple steps:

1. Open the hood of your vehicle and locate the back of the headlight assembly.
2. Disconnect the electrical connector from the bulb by gently pulling it away.
3. Twist the bulb counterclockwise to remove it from the assembly.
4. Insert the new bulb into the socket and twist it clockwise to secure it.
5. Reconnect the electrical connector to the new bulb.
6. Test the new bulb by turning on the headlights to ensure it is functioning properly.
7. Repeat the process for the other headlight if necessary.

Conclusion

Knowing the correct headlight bulb size for your 2019 Equinox is essential when it comes to replacing a burnt-out or damaged bulb. By referring to the table provided in this article, you can easily find the appropriate bulb size for each headlight type. Remember to follow the steps outlined to safely replace the headlight bulb and ensure optimal visibility while driving.

Leave a Reply