Pontiac Grand Prix Headlight Bulb Size
Introduction
The Pontiac Grand Prix is a popular mid-size car that offers a sleek design and powerful performance. Like any other vehicle, the headlights on the Grand Prix may need to be replaced from time to time. To ensure you purchase the correct replacement bulb, it is important to know the headlight bulb size for your specific model.
Locating the Headlight Bulb Size
To determine the correct headlight bulb size for your Pontiac Grand Prix, you can refer to the owner’s manual or check the existing bulb in your vehicle. However, if you don’t have access to the manual or are unable to inspect the bulb, you can also find the information online or by contacting a Pontiac dealership.
Table of Pontiac Grand Prix Headlight Bulb Sizes
To make it easier for you, here is a table listing the headlight bulb sizes for various Pontiac Grand Prix models:
| Year | Model | Headlight Bulb Size |
|---|---|---|
| 2004-2008 | Base, GT1, GT2, GTP | 9007 |
| 2005-2008 | GXP | 9006 |
| 2008-2009 | GXP | H11 |
Replacing the Headlight Bulb
Once you have determined the correct headlight bulb size for your Pontiac Grand Prix, you can proceed with the replacement process. Here are the general steps to follow:
1. Park your vehicle on a flat surface and turn off the engine.
2. Open the hood of your car and locate the back of the headlight assembly.
3. Disconnect the electrical connector from the back of the bulb by gently pulling it away.
4. Remove the old bulb by twisting it counterclockwise and pulling it out.
5. Insert the new bulb into the socket and twist it clockwise to secure it in place.
6. Reconnect the electrical connector to the back of the bulb.
7. Test the new bulb by turning on your headlights before closing the hood.
Conclusion
Knowing the correct headlight bulb size for your Pontiac Grand Prix is essential when it comes to replacing a burnt-out bulb. By referring to the owner’s manual, checking the existing bulb, or using online resources, you can easily find the information you need. Remember to follow the proper steps when replacing the bulb to ensure a successful installation.