Jeep Commander Headlight Bulb Size: A Guide to Proper Replacement

Jeep Commander Headlight Bulb Size

Introduction

The Jeep Commander is a popular SUV known for its ruggedness and off-road capabilities. One important aspect of any vehicle is its headlights, as they play a crucial role in ensuring visibility and safety while driving. If you are looking to replace the headlight bulbs in your Jeep Commander, it is essential to know the correct bulb size to ensure compatibility and proper functioning. In this article, we will provide you with the necessary information regarding the headlight bulb size for the Jeep Commander.

Headlight Bulb Size Table

To make it easier for you to find the correct headlight bulb size for your Jeep Commander, here is a table outlining the bulb sizes for different model years:

Model Year Low Beam Bulb Size High Beam Bulb Size
2006-2010 H13 H13
2011-2013 H11 H11

Steps to Replace Headlight Bulbs

If you need to replace the headlight bulbs in your Jeep Commander, here are the steps you can follow:

1. Park your Jeep Commander on a flat surface and turn off the engine. Engage the parking brake for added safety.
2. Open the hood of your vehicle and locate the headlight assembly on the front of the vehicle.
3. Depending on the model year of your Jeep Commander, you may need to remove the headlight assembly to access the bulbs. Refer to your vehicle’s manual for specific instructions on how to remove the headlight assembly.
4. Once you have access to the headlight bulb, carefully disconnect the electrical connector from the back of the bulb.
5. Remove the old bulb by twisting it counterclockwise and pulling it out of the socket.
6. Insert the new bulb into the socket and twist it clockwise to secure it in place.
7. Reconnect the electrical connector to the back of the new bulb.
8. If you had to remove the headlight assembly, reattach it following the instructions in your vehicle’s manual.
9. Repeat the above steps for the other headlight bulb if necessary.
10. Close the hood of your Jeep Commander and test the new bulbs by turning on the headlights.

Conclusion

Knowing the correct headlight bulb size for your Jeep Commander is essential for maintaining proper visibility and safety on the road. Refer to the table provided in this article to find the appropriate bulb size for your specific model year. If you need to replace the bulbs, follow the steps outlined above to ensure a successful and hassle-free installation. Remember to consult your vehicle’s manual for any specific instructions or precautions. Stay safe and enjoy your well-lit adventures in your Jeep Commander!

Leave a Reply