Honda Fit 2012 Headlight Bulb Size: A Comprehensive Guide
Introduction
The Honda Fit 2012 is a popular and reliable compact car known for its fuel efficiency and versatility. One important aspect of vehicle maintenance is ensuring that all the lights are in proper working condition, including the headlights. If you need to replace the headlight bulbs in your Honda Fit 2012, it is crucial to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the necessary information on the headlight bulb size for the Honda Fit 2012.
Headlight Bulb Size Table
To make it easier for you to find the correct headlight bulb size for your Honda Fit 2012, we have compiled a table with the necessary information. Please refer to the table below:
| Headlight Bulb Type | Headlight Bulb Size |
|---|---|
| Low Beam | H11 |
| High Beam | 9005 |
Steps to Replace Headlight Bulbs
Now that you know the correct headlight bulb sizes for your Honda Fit 2012, let’s go through the steps to replace them:
1. Park your vehicle on a flat surface and turn off the engine. Make sure the headlights are also turned off.
2. Open the hood of your Honda Fit 2012 and locate the back of the headlight assembly.
3. Depending on the specific model and trim level of your Fit, you may need to remove the dust cover or access panel to reach the headlight bulb.
4. Once you have access to the headlight bulb, disconnect the electrical connector by gently pulling it away from the bulb.
5. Next, remove the retaining clip or spring that holds the bulb in place. Carefully release the clip or spring and set it aside.
6. Now, you can remove the old headlight bulb by gently pulling it straight out from the socket.
7. Take the new headlight bulb with the correct size and insert it into the socket. Be careful not to touch the glass part of the bulb with your bare hands, as it can cause premature failure.
8. Reattach the retaining clip or spring to secure the new bulb in place.
9. Connect the electrical connector back to the bulb.
10. Before closing the access panel or dust cover, turn on the headlights to ensure that the new bulb is working properly.
11. If everything is functioning correctly, close the access panel or dust cover and lower the hood of your Honda Fit 2012.
Conclusion
Knowing the correct headlight bulb size for your Honda Fit 2012 is essential for maintaining proper visibility and safety on the road. Refer to the table provided in this article to ensure you purchase the correct bulbs. Additionally, following the steps outlined above will help you replace the headlight bulbs with ease. Remember to exercise caution and consult your vehicle’s owner’s manual for any specific instructions or precautions.