2007 Polaris Ranger 700 XP Headlight Bulb Size
When it comes to maintaining your Polaris Ranger 700 XP, one of the essential components to consider is the headlight bulbs. Over time, these bulbs may wear out or become damaged, requiring replacement. To ensure you get the correct bulb size for your 2007 Polaris Ranger 700 XP, refer to the table below:
Headlight Bulb Type | Bulb Size |
---|---|
Low Beam | H11 |
High Beam | 9005 |
Now that you know the correct bulb sizes for your Polaris Ranger 700 XP, let’s dive into the steps to replace the headlight bulbs:
Replacing the Low Beam Bulb (H11)
- Locate the low beam headlight assembly on your Polaris Ranger 700 XP.
- Disconnect the electrical connector from the back of the bulb by gently pulling it away.
- Remove the retaining clip or ring that holds the bulb in place. This may require twisting or sliding it off, depending on the design.
- Take out the old H11 bulb and replace it with the new one, making sure it is securely seated.
- Reattach the retaining clip or ring to hold the bulb in place.
- Connect the electrical connector back to the bulb.
Replacing the High Beam Bulb (9005)
- Locate the high beam headlight assembly on your Polaris Ranger 700 XP.
- Disconnect the electrical connector from the back of the bulb by gently pulling it away.
- Remove the retaining clip or ring that holds the bulb in place. This may require twisting or sliding it off, depending on the design.
- Take out the old 9005 bulb and replace it with the new one, making sure it is securely seated.
- Reattach the retaining clip or ring to hold the bulb in place.
- Connect the electrical connector back to the bulb.
Remember to always handle the new bulbs with clean hands or gloves to prevent any oils or dirt from affecting their performance. It is also recommended to replace both low beam and high beam bulbs at the same time for optimal lighting consistency.
By following these steps and using the correct bulb sizes, you can easily replace the headlight bulbs on your 2007 Polaris Ranger 700 XP and ensure safe and reliable lighting during your rides.