Ford Escape Headlight Bulb Size
Introduction
The Ford Escape is a popular compact SUV known for its stylish design and reliable performance. Like any other vehicle, the Ford Escape requires regular maintenance, including replacing the headlights when they burn out. One important aspect to consider when replacing the headlights is the correct bulb size. In this article, we will provide you with the necessary information about the Ford Escape headlight bulb size.
Headlight Bulb Size Table
The Ford Escape is a popular compact SUV known for its stylish design and reliable performance. Like any other vehicle, the Ford Escape requires regular maintenance, including replacing the headlights when they burn out. One important aspect to consider when replacing the headlights is the correct bulb size. In this article, we will provide you with the necessary information about the Ford Escape headlight bulb size.
Headlight Bulb Size Table
Year | Headlight Bulb Size |
---|---|
2001-2004 | 9003/HB2 |
2005-2007 | 9007/HB5 |
2008-2012 | H13/9008 |
2013-2019 | H11 |
2020-present | H11 |
Determining the Correct Bulb Size
To determine the correct headlight bulb size for your Ford Escape, you can refer to the table above. The table lists the bulb sizes for different model years. Simply find the year of your vehicle and match it with the corresponding headlight bulb size.
Replacing the Headlight Bulb
Once you have determined the correct headlight bulb size for your Ford Escape, you can proceed with replacing the bulb. Here are the general steps to follow:
Once you have determined the correct headlight bulb size for your Ford Escape, you can proceed with replacing the bulb. Here are the general steps to follow:
1. Park your Ford Escape on a flat surface and turn off the engine.
2. Open the hood and locate the back of the headlight assembly.
3. Disconnect the electrical connector from the back of the bulb by gently pulling it off.
4. Remove the rubber dust cover by twisting it counterclockwise.
5. Unclip the metal retaining clip that holds the bulb in place.
6. Carefully remove the old bulb from the socket.
7. Insert the new bulb into the socket, making sure it is securely seated.
8. Reattach the metal retaining clip to hold the bulb in place.
9. Replace the rubber dust cover by twisting it clockwise.
10. Reconnect the electrical connector to the back of the bulb.
11. Close the hood and test the new headlight bulb.