Jeep WJ Headlight Bulb Size
Introduction
When it comes to maintaining your Jeep WJ’s headlights, it’s important to know the correct bulb size to ensure proper fitment and optimal performance. This article will guide you through the various headlight bulb sizes available for the Jeep WJ model.
Headlight Bulb Sizes
To determine the correct headlight bulb size for your Jeep WJ, refer to the following table:
| Headlight Type | Bulb Size |
|---|---|
| Low Beam | H11 |
| High Beam | 9005 |
| Fog Light | 9006 |
Replacing the Headlight Bulbs
If you need to replace a headlight bulb on your Jeep WJ, follow these steps:
- Ensure the engine is turned off and the headlights are not hot.
- Open the hood of your Jeep WJ and locate the back of the headlight assembly.
- Disconnect the electrical connector from the back of the bulb by gently pulling it away.
- Remove the rubber dust cover by twisting it counterclockwise.
- Unclip the metal retaining clip that holds the bulb in place.
- Gently remove the old bulb from the socket.
- Insert the new bulb into the socket, being careful not to touch the glass part of the bulb with your bare hands.
- Reattach the metal retaining clip to secure the bulb in place.
- Replace the rubber dust cover by twisting it clockwise.
- Reconnect the electrical connector to the back of the bulb.
- Repeat the above steps for the other headlight bulb if necessary.
- Close the hood of your Jeep WJ.
- Turn on the engine and test the headlights to ensure they are working properly.
Conclusion
Knowing the correct headlight bulb size for your Jeep WJ is essential for maintaining proper visibility on the road. Refer to the table provided in this article to ensure you choose the right bulb size when replacing your headlights. Remember to follow the steps outlined for a safe and successful bulb replacement process.