2019 Ford F150 XLT Headlight Bulb Size: A Guide for Proper Replacement

2019 Ford F150 XLT Headlight Bulb Size

Introduction

The 2019 Ford F150 XLT is a popular pickup truck known for its durability and performance. One important aspect of any vehicle is its headlights, as they play a crucial role in ensuring visibility and safety on the road. If you are looking to replace the headlight bulbs in your 2019 Ford F150 XLT, it is essential to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the headlight bulb size for the 2019 Ford F150 XLT.

Headlight Bulb Size for 2019 Ford F150 XLT

To determine the correct headlight bulb size for your 2019 Ford F150 XLT, you can refer to the vehicle’s owner’s manual or consult a Ford dealership. However, we have compiled a table below for your convenience:

Headlight Bulb Size
Low Beam H11
High Beam 9005

Replacing Headlight Bulbs

If you need to replace the headlight bulbs in your 2019 Ford F150 XLT, here are the general steps to follow:

1. Park your vehicle on a flat surface and turn off the engine.
2. Open the hood and locate the back of the headlight assembly.
3. Disconnect the electrical connector from the back of the bulb by gently pulling it away.
4. Remove the rubber cover or dust cap that protects the bulb.
5. Twist the bulb counterclockwise to release it from the socket.
6. Insert the new bulb into the socket and twist it clockwise to secure it.
7. Replace the rubber cover or dust cap.
8. Reconnect the electrical connector to the back of the bulb.
9. Repeat the process for the other headlight bulb if necessary.
10. Close the hood and test the headlights to ensure they are working properly.

Conclusion

Knowing the correct headlight bulb size for your 2019 Ford F150 XLT is essential when it comes to replacing them. The table provided in this article should help you identify the appropriate bulb size for both low beam and high beam headlights. Remember to follow the manufacturer’s instructions and exercise caution when replacing the bulbs to ensure a safe and successful installation.

Leave a Reply