2008 Honda Pilot Headlight Bulb Size
When it comes to replacing the headlight bulbs in your 2008 Honda Pilot, it’s important to know the correct bulb size to ensure a proper fit and optimal visibility. Here, we will provide you with the necessary information to find the right headlight bulb size for your vehicle.
Headlight Bulb Size Table
| Headlight Type | Bulb Size |
|---|---|
| Low Beam | H11 |
| High Beam | 9005 |
| Front Turn Signal | 7440A |
| Front Side Marker | 168 |
| Front Parking Light | 168 |
| Front Fog Light | H11 |
Steps to Replace Headlight Bulbs
Now that you know the correct bulb size for each headlight type, let’s go through the steps to replace the headlight bulbs in your 2008 Honda Pilot:
- Open the hood of your vehicle and locate the back of the headlight assembly.
- Disconnect the power connector from the back of the headlight bulb by gently pressing the release tab and pulling it away.
- Remove the rubber dust cover by twisting it counterclockwise.
- Unclip the metal retaining clip that holds the bulb in place.
- Gently pull out the old bulb from the socket and discard it.
- Insert the new bulb into the socket, making sure it is securely seated.
- Reattach the metal retaining clip to hold the bulb in place.
- Replace the rubber dust cover by twisting it clockwise.
- Reconnect the power connector to the back of the new bulb.
- Repeat the above steps for the other headlight bulb, if necessary.
- Close the hood of your vehicle.
It is recommended to replace both headlight bulbs at the same time to ensure consistent brightness and color temperature. Additionally, always handle the new bulbs with clean gloves or a clean cloth to avoid any oil or dirt transfer, as this can affect their performance.
By following these steps and using the correct bulb size, you can easily replace the headlight bulbs in your 2008 Honda Pilot and ensure safe and clear visibility while driving.