2013 Chrysler 200 Headlight Bulb Size: A Guide to Proper Replacement

2013 Chrysler 200 Headlight Bulb Size

Introduction

The Chrysler 200 is a popular midsize sedan that offers a stylish design and a comfortable driving experience. If you own a 2013 Chrysler 200 and are looking to replace your headlight bulbs, it’s important to know the correct bulb size to ensure a proper fit and optimal performance. In this article, we will provide you with the necessary information on the headlight bulb size for the 2013 Chrysler 200.

Headlight Bulb Size Table

To make the process of finding the correct headlight bulb size easier for you, we have compiled a table below:

Headlight Bulb Type Headlight Bulb Size
Low Beam H11
High Beam 9005
Front Turn Signal 7440A
Front Side Marker 194

Steps to Replace Headlight Bulbs

If you need to replace your headlight bulbs in your 2013 Chrysler 200, follow these steps:

1. Park your vehicle on a flat surface and turn off the engine. Make sure the headlights are also turned off.
2. Open the hood of your car and locate the back of the headlight assembly.
3. Depending on which bulb you need to replace, twist off the headlight bulb cover counterclockwise to remove it.
4. Carefully disconnect the electrical connector from the back of the bulb.
5. Remove the old bulb by gently pulling it straight out from the socket.
6. Insert the new bulb into the socket, making sure it is securely in place.
7. Reconnect the electrical connector to the back of the new bulb.
8. Replace the headlight bulb cover by twisting it clockwise until it is securely fastened.
9. Repeat the above steps for the other headlight bulb if necessary.
10. Close the hood of your car.

Conclusion

Knowing the correct headlight bulb size for your 2013 Chrysler 200 is essential when it comes to replacing your bulbs. By referring to the table provided in this article, you can easily find the appropriate bulb size for each headlight function. Following the step-by-step instructions for replacing the headlight bulbs will ensure a smooth and successful replacement process. Remember to always exercise caution and consult your vehicle’s manual if you have any doubts or concerns.

Leave a Reply