2017 Ford Transit Headlight Bulb Size: A Guide to Proper Replacement

2017 Ford Transit Headlight Bulb Size

Introduction

The headlights of your vehicle are essential for safe driving, especially during low-light conditions or at night. If you own a 2017 Ford Transit and need to replace a headlight bulb, it’s crucial to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the necessary information regarding the headlight bulb size for the 2017 Ford Transit.

Headlight Bulb Size Table

To make it easier for you to find the correct headlight bulb size for your 2017 Ford Transit, here is a table that lists the bulb sizes for both the low beam and high beam headlights:

Headlight Type Bulb Size
Low Beam H11
High Beam 9005

Steps to Replace Headlight Bulbs

If you need to replace a headlight bulb in your 2017 Ford Transit, follow these steps:

  1. Turn off the engine and open the hood of your vehicle.
  2. Locate the back of the headlight assembly where the bulb is housed.
  3. Unplug the electrical connector from the back of the bulb by gently pressing the release tab and pulling it away.
  4. Remove the retaining clip or ring that holds the bulb in place. This may require twisting or unclipping, depending on the specific model.
  5. Take out the old bulb and replace it with the new one, making sure not to touch the glass part of the bulb with your bare hands. If you do touch it, clean it with rubbing alcohol before installing.
  6. Reattach the retaining clip or ring to secure the new bulb in place.
  7. Plug the electrical connector back into the bulb.
  8. Close the hood and test the headlights to ensure they are working correctly.

Conclusion

Knowing the correct headlight bulb size for your 2017 Ford Transit is crucial when it comes to replacing a bulb. By referring to the table provided and following the steps outlined, you can easily replace a headlight bulb and ensure optimal visibility while driving. Remember to exercise caution and consult your vehicle’s manual if you encounter any difficulties during the replacement process.

Leave a Reply