Ford Escape 2011 Headlight Bulb Size: A Guide to Proper Replacement

Ford Escape 2011 Headlight Bulb Size

The Ford Escape is a popular compact SUV known for its reliability and versatility. If you own a Ford Escape from the year 2011, you may find yourself in need of replacing a headlight bulb at some point. It’s important to know the correct bulb size for your vehicle to ensure proper fitment and optimal performance. In this article, we will provide you with the necessary information regarding the headlight bulb size for the Ford Escape 2011 model.

Headlight Bulb Size Table

Headlight Bulb Size
Low Beam H11
High Beam 9005

As shown in the table above, the Ford Escape 2011 model uses an H11 bulb for the low beam headlights and a 9005 bulb for the high beam headlights. It’s important to note that these bulb sizes may vary depending on the trim level and optional packages of your specific vehicle. Therefore, it is always recommended to double-check your owner’s manual or consult a professional if you are unsure about the bulb size for your particular Ford Escape 2011 model.

Steps to Replace Headlight Bulbs

If you need to replace a headlight bulb in your Ford Escape 2011, follow these steps:

  1. Open the hood of your vehicle and locate the back of the headlight assembly.
  2. Disconnect the electrical connector from the back of the bulb by gently pulling it off.
  3. Remove the rubber dust cover by twisting it counterclockwise.
  4. Unclip the metal retaining clip that holds the bulb in place.
  5. Gently pull out the old bulb from the socket.
  6. Insert the new bulb into the socket, making sure it is securely seated.
  7. Reattach the metal retaining clip to secure the bulb.
  8. Replace the rubber dust cover by twisting it clockwise.
  9. Reconnect the electrical connector to the back of the bulb.
  10. Close the hood of your vehicle.

It is important to handle the new bulb with care and avoid touching the glass portion, as the oils from your skin can cause premature failure. If you accidentally touch the bulb, clean it with rubbing alcohol before installation.

By following these steps and using the correct bulb size, you can easily replace a headlight bulb in your Ford Escape 2011, ensuring optimal visibility and safety on the road.

 

Leave a Reply