Subaru Legacy Headlight Bulb Size
Introduction
The Subaru Legacy is a popular midsize sedan known for its reliability and performance. One important aspect of any vehicle is its headlights, as they ensure visibility and safety while driving at night or in adverse weather conditions. If you are looking to replace the headlight bulbs in your Subaru Legacy, it is crucial to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the necessary information regarding the headlight bulb size for different Subaru Legacy models.
Subaru Legacy Headlight Bulb Size Table
The Subaru Legacy is a popular midsize sedan known for its reliability and performance. One important aspect of any vehicle is its headlights, as they ensure visibility and safety while driving at night or in adverse weather conditions. If you are looking to replace the headlight bulbs in your Subaru Legacy, it is crucial to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the necessary information regarding the headlight bulb size for different Subaru Legacy models.
Subaru Legacy Headlight Bulb Size Table
| Year | Low Beam Bulb Size | High Beam Bulb Size |
|---|---|---|
| 2005 – 2009 | H7 | 9005 |
| 2010 – 2014 | H11 | 9005 |
| 2015 – 2019 | H11 | 9005 |
| 2020 – Present | H11 | 9005 |
Steps to Replace the Headlight Bulbs in a Subaru Legacy
Step 1: Gather the necessary tools
Before starting the replacement process, make sure you have the following tools:
– New headlight bulbs (according to the correct size for your Subaru Legacy)
– Gloves (to avoid touching the bulb with bare hands)
– Screwdriver (if required to remove any covers or clips)
Step 2: Open the hood and locate the headlight assembly
To access the headlight bulbs, you need to open the hood of your Subaru Legacy and locate the headlight assembly. The assembly is typically secured with a few screws or clips.
Step 3: Remove the headlight assembly cover (if applicable)
Some Subaru Legacy models may have a cover over the headlight assembly. If present, carefully remove the cover using a screwdriver or by releasing the clips.
Step 4: Disconnect the electrical connector
Before removing the old bulb, disconnect the electrical connector attached to the back of the headlight assembly. This connector powers the bulb.
Step 5: Remove the old bulb
Gently twist the old bulb counterclockwise to release it from the headlight assembly. Be cautious not to apply excessive force, as it may damage the assembly.
Step 6: Install the new bulb
Take the new headlight bulb, making sure not to touch the glass portion with your bare hands. Oils from your skin can cause the bulb to overheat and fail prematurely. Align the tabs on the bulb with the slots in the headlight assembly and twist it clockwise to secure it.
Step 7: Reconnect the electrical connector
Once the new bulb is securely in place, reconnect the electrical connector to the back of the headlight assembly.
Step 8: Test the headlights
Before closing the hood and completing the replacement process, turn on your Subaru Legacy’s headlights to ensure the new bulb is functioning correctly. If the bulb does not illuminate, double-check the installation and connections.
Conclusion
Knowing the correct headlight bulb size for your Subaru Legacy is essential for maintaining optimal visibility and safety on the road. Refer to the provided table to determine the appropriate bulb size for your specific model year. When replacing the headlight bulbs, follow the step-by-step instructions to ensure a successful installation.
Before starting the replacement process, make sure you have the following tools:
– New headlight bulbs (according to the correct size for your Subaru Legacy)
– Gloves (to avoid touching the bulb with bare hands)
– Screwdriver (if required to remove any covers or clips)
Step 2: Open the hood and locate the headlight assembly
To access the headlight bulbs, you need to open the hood of your Subaru Legacy and locate the headlight assembly. The assembly is typically secured with a few screws or clips.
Step 3: Remove the headlight assembly cover (if applicable)
Some Subaru Legacy models may have a cover over the headlight assembly. If present, carefully remove the cover using a screwdriver or by releasing the clips.
Step 4: Disconnect the electrical connector
Before removing the old bulb, disconnect the electrical connector attached to the back of the headlight assembly. This connector powers the bulb.
Step 5: Remove the old bulb
Gently twist the old bulb counterclockwise to release it from the headlight assembly. Be cautious not to apply excessive force, as it may damage the assembly.
Step 6: Install the new bulb
Take the new headlight bulb, making sure not to touch the glass portion with your bare hands. Oils from your skin can cause the bulb to overheat and fail prematurely. Align the tabs on the bulb with the slots in the headlight assembly and twist it clockwise to secure it.
Step 7: Reconnect the electrical connector
Once the new bulb is securely in place, reconnect the electrical connector to the back of the headlight assembly.
Step 8: Test the headlights
Before closing the hood and completing the replacement process, turn on your Subaru Legacy’s headlights to ensure the new bulb is functioning correctly. If the bulb does not illuminate, double-check the installation and connections.
Conclusion
Knowing the correct headlight bulb size for your Subaru Legacy is essential for maintaining optimal visibility and safety on the road. Refer to the provided table to determine the appropriate bulb size for your specific model year. When replacing the headlight bulbs, follow the step-by-step instructions to ensure a successful installation.
Some Subaru Legacy models may have a cover over the headlight assembly. If present, carefully remove the cover using a screwdriver or by releasing the clips.
Step 4: Disconnect the electrical connector
Before removing the old bulb, disconnect the electrical connector attached to the back of the headlight assembly. This connector powers the bulb.
Step 5: Remove the old bulb
Gently twist the old bulb counterclockwise to release it from the headlight assembly. Be cautious not to apply excessive force, as it may damage the assembly.
Step 6: Install the new bulb
Take the new headlight bulb, making sure not to touch the glass portion with your bare hands. Oils from your skin can cause the bulb to overheat and fail prematurely. Align the tabs on the bulb with the slots in the headlight assembly and twist it clockwise to secure it.
Step 7: Reconnect the electrical connector
Once the new bulb is securely in place, reconnect the electrical connector to the back of the headlight assembly.
Step 8: Test the headlights
Before closing the hood and completing the replacement process, turn on your Subaru Legacy’s headlights to ensure the new bulb is functioning correctly. If the bulb does not illuminate, double-check the installation and connections.
Conclusion
Knowing the correct headlight bulb size for your Subaru Legacy is essential for maintaining optimal visibility and safety on the road. Refer to the provided table to determine the appropriate bulb size for your specific model year. When replacing the headlight bulbs, follow the step-by-step instructions to ensure a successful installation.
Gently twist the old bulb counterclockwise to release it from the headlight assembly. Be cautious not to apply excessive force, as it may damage the assembly.
Step 6: Install the new bulb
Take the new headlight bulb, making sure not to touch the glass portion with your bare hands. Oils from your skin can cause the bulb to overheat and fail prematurely. Align the tabs on the bulb with the slots in the headlight assembly and twist it clockwise to secure it.
Step 7: Reconnect the electrical connector
Once the new bulb is securely in place, reconnect the electrical connector to the back of the headlight assembly.
Step 8: Test the headlights
Before closing the hood and completing the replacement process, turn on your Subaru Legacy’s headlights to ensure the new bulb is functioning correctly. If the bulb does not illuminate, double-check the installation and connections.
Conclusion
Knowing the correct headlight bulb size for your Subaru Legacy is essential for maintaining optimal visibility and safety on the road. Refer to the provided table to determine the appropriate bulb size for your specific model year. When replacing the headlight bulbs, follow the step-by-step instructions to ensure a successful installation.
Once the new bulb is securely in place, reconnect the electrical connector to the back of the headlight assembly.
Step 8: Test the headlights
Before closing the hood and completing the replacement process, turn on your Subaru Legacy’s headlights to ensure the new bulb is functioning correctly. If the bulb does not illuminate, double-check the installation and connections.
Conclusion
Knowing the correct headlight bulb size for your Subaru Legacy is essential for maintaining optimal visibility and safety on the road. Refer to the provided table to determine the appropriate bulb size for your specific model year. When replacing the headlight bulbs, follow the step-by-step instructions to ensure a successful installation.
Knowing the correct headlight bulb size for your Subaru Legacy is essential for maintaining optimal visibility and safety on the road. Refer to the provided table to determine the appropriate bulb size for your specific model year. When replacing the headlight bulbs, follow the step-by-step instructions to ensure a successful installation.