2010 Subaru Legacy Headlight Bulb Size
If you own a 2010 Subaru Legacy and are looking to replace your headlight bulbs, it’s important to know the correct bulb size to ensure a proper fit. Having the right bulb size will not only improve visibility but also enhance the overall appearance of your vehicle. In this article, we will provide you with the necessary information to determine the correct headlight bulb size for your 2010 Subaru Legacy.
Identifying the Correct Bulb Size
Before purchasing new headlight bulbs, you need to identify the correct bulb size for your 2010 Subaru Legacy. There are a few methods you can use to determine the appropriate bulb size:
- Check the Owner’s Manual: The first and easiest method is to refer to your vehicle’s owner’s manual. The manual should have a section dedicated to bulb replacement, which will provide you with the necessary information.
- Inspect the Current Bulbs: If you have access to your current headlight bulbs, you can remove them and check for any markings or labels that indicate the bulb size. Most bulbs will have the size printed on them.
- Consult a Subaru Dealership: If you are still unsure about the correct bulb size, you can contact a Subaru dealership and provide them with your vehicle’s information. They will be able to assist you in identifying the appropriate bulb size for your 2010 Subaru Legacy.
Headlight Bulb Size Chart
Here is a table that lists the headlight bulb sizes for the 2010 Subaru Legacy:
| Headlight Bulb | Size |
|---|---|
| Low Beam | H7 |
| High Beam | 9005 |
| Front Turn Signal | 7440A |
| Front Side Marker | 168 |
| Front Parking Light | 168 |
| Front Fog Light | H11 |
It’s important to note that bulb sizes may vary depending on the trim level and specific options of your 2010 Subaru Legacy. Therefore, it is always recommended to double-check the bulb size before making a purchase.
Replacing the Headlight Bulbs
Once you have determined the correct bulb size, you can proceed with replacing the headlight bulbs. Here are the general steps to follow:
- Open the hood of your Subaru Legacy and locate the back of the headlight assembly.
- Disconnect the electrical connector from the back of the bulb by gently pulling it away.
- Remove the old bulb by twisting it counterclockwise and pulling it out.
- Insert the new bulb into the socket and twist it clockwise to secure it in place.
- Reconnect the electrical connector to the back of the new bulb.
- Repeat the process for the other headlight bulb if necessary.
- Test the new bulbs by turning on your headlights to ensure they are functioning correctly.
It is always recommended to consult your vehicle’s owner’s manual or seek professional assistance if you are unsure about replacing the headlight bulbs yourself.
Conclusion
Knowing the correct headlight bulb size for your 2010 Subaru Legacy is essential for maintaining optimal visibility and safety on the road. By following the methods mentioned above and referring to the provided bulb size chart, you can easily determine the appropriate bulb size for your vehicle. Remember to handle headlight bulbs with care and consult professional help if needed during the replacement process.