2020 Honda CR-V Headlight Bulb Size: A Guide to Finding the Correct Size

2020 Honda CR-V Headlight Bulb Size

If you are a proud owner of a 2020 Honda CR-V and need to replace your headlight bulb, it’s essential to know the correct bulb size to ensure a proper fit. This article will provide you with the necessary information to find the right headlight bulb size for your Honda CR-V.

Identifying the Correct Bulb Size

Before purchasing a new headlight bulb, you need to determine the correct size for your 2020 Honda CR-V. Here are the steps to identify the bulb size:

  1. Open the hood of your Honda CR-V and locate the headlight assembly.
  2. Inspect the back of the headlight assembly to find the bulb socket.
  3. Remove the bulb socket by twisting it counterclockwise.
  4. Once the bulb socket is removed, take out the old bulb by gently pulling it straight out.
  5. Examine the base of the bulb to identify the bulb size. It is usually marked with a series of letters and numbers.

Common Bulb Sizes for 2020 Honda CR-V

The following table provides a list of common headlight bulb sizes for the 2020 Honda CR-V:

Headlight Bulb Type Bulb Size
Halogen H11
LED 9005
Xenon HID D2S

It’s important to note that the bulb size may vary depending on the trim level and optional packages of your Honda CR-V. Therefore, it is always recommended to double-check the bulb size by referring to your vehicle’s owner’s manual or contacting a Honda dealership.

Replacing the Headlight Bulb

Once you have determined the correct bulb size, you can proceed with replacing the headlight bulb. Here are the general steps to follow:

  1. Make sure the vehicle’s engine is turned off and the headlights are switched off.
  2. Access the headlight assembly by opening the hood.
  3. Locate the bulb socket and disconnect it by twisting it counterclockwise.
  4. Remove the old bulb by gently pulling it straight out.
  5. Insert the new bulb into the socket, making sure it is securely in place.
  6. Reconnect the bulb socket by twisting it clockwise.
  7. Test the new bulb by turning on the headlights.
  8. Repeat the process for the other headlight if necessary.

Remember to handle the new bulb with care and avoid touching the glass part, as the oils from your skin can damage the bulb. If you are unsure or uncomfortable with replacing the headlight bulb yourself, it is recommended to seek professional assistance.

By following these steps and knowing the correct headlight bulb size for your 2020 Honda CR-V, you can ensure optimal visibility and safety while driving at night or in low-light conditions.

Leave a Reply