2020 Chevy Blazer Headlight Bulb Size
Introduction
The 2020 Chevy Blazer is a stylish and versatile SUV that offers a range of features and options. One important aspect of any vehicle is its headlights, as they play a crucial role in providing visibility and safety on the road. If you are looking to replace the headlight bulbs in your 2020 Chevy Blazer, it is essential to know the correct bulb size to ensure a proper fit and optimal performance. In this article, we will provide you with the headlight bulb size information for the 2020 Chevy Blazer.
Headlight Bulb Size Table
To make it easier for you to find the correct headlight bulb size for your 2020 Chevy Blazer, we have compiled a table below:
| Headlight Type | Bulb Size |
|---|---|
| Low Beam | H11 |
| High Beam | 9005 |
| Front Turn Signal | 7443 |
| Front Side Marker | 194 |
| Front Parking Light | 194 |
| Front Fog Light | H8 |
Steps to Replace Headlight Bulbs
If you need to replace the headlight bulbs in your 2020 Chevy Blazer, follow these steps:
1. Open the hood of your vehicle and locate the back of the headlight assembly.
2. Disconnect the power connector from the back of the bulb by gently pulling it straight out.
3. Remove the rubber dust cover by twisting it counterclockwise.
4. Release the retaining clip or wire that holds the bulb in place.
5. Carefully remove the old bulb from the socket and discard it.
6. Insert the new bulb into the socket, making sure it is properly aligned.
7. Secure the bulb in place by reattaching the retaining clip or wire.
8. Replace the rubber dust cover by twisting it clockwise.
9. Reconnect the power connector to the back of the bulb.
10. Test the new bulb by turning on the headlights and ensuring they are functioning correctly.
Conclusion
Knowing the correct headlight bulb size for your 2020 Chevy Blazer is essential when it comes to replacing them. By referring to the table provided in this article, you can easily find the appropriate bulb size for each headlight type. Remember to follow the steps carefully when replacing the bulbs to ensure a proper fit and optimal performance.