2018 Toyota Tacoma Headlight Bulb Size
When it comes to maintaining your vehicle’s headlights, it is essential to know the correct bulb size for replacement. In the case of the 2018 Toyota Tacoma, having the right headlight bulb size ensures optimal visibility and safety on the road. Let’s take a closer look at the headlight bulb size for this popular truck model.
Headlight Bulb Size Table
| Headlight Bulb Type | Size |
|---|---|
| Low Beam | 9003/HB2 |
| High Beam | 9003/HB2 |
The 2018 Toyota Tacoma uses the same bulb size for both the low beam and high beam headlights. The bulb type required is 9003/HB2. It is important to note that this information is specific to the 2018 model year, and bulb sizes may vary for different Tacoma model years or trim levels.
Replacing the Headlight Bulbs
If you need to replace the headlight bulbs in your 2018 Toyota Tacoma, follow these steps:
- Ensure the vehicle is turned off and the headlights are cool to the touch.
- Open the hood of your Tacoma and locate the back of the headlight assembly.
- Unplug the electrical connector from the back of the bulb by gently pressing the release tab and pulling it away.
- Remove the rubber dust cover by twisting it counterclockwise.
- Take out the old bulb by turning it counterclockwise and pulling it straight out.
- Insert the new 9003/HB2 bulb into the socket and twist it clockwise to secure it in place.
- Replace the rubber dust cover by twisting it clockwise.
- Reconnect the electrical connector to the back of the bulb until it clicks into place.
- Repeat the steps for the other headlight if necessary.
- Close the hood and test the headlights to ensure they are functioning properly.
It is recommended to consult your vehicle’s owner’s manual for detailed instructions and safety precautions specific to your Tacoma model year.
Conclusion
Knowing the correct headlight bulb size for your 2018 Toyota Tacoma is crucial for maintaining optimal visibility and safety while driving. The table provided in this article outlines the bulb size required for both low beam and high beam headlights. If you need to replace the bulbs, following the step-by-step instructions will help you accomplish the task efficiently. Remember to always refer to your vehicle’s owner’s manual for accurate information and safety guidelines.