2018 Honda Rancher 420 Headlight Bulb Size
Introduction
The Honda Rancher 420 is a popular all-terrain vehicle (ATV) known for its durability and reliability. One of the essential components of any vehicle is its headlights, as they ensure visibility and safety during nighttime rides. If you are a proud owner of a 2018 Honda Rancher 420 and need to replace the headlight bulbs, it’s crucial to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the necessary information on the headlight bulb size for the 2018 Honda Rancher 420.
Headlight Bulb Size
To determine the correct headlight bulb size for your 2018 Honda Rancher 420, you can refer to the owner’s manual or consult a reputable Honda dealership or mechanic. However, to make things easier for you, we have compiled a table below that outlines the headlight bulb size for both the high beam and low beam.
Headlight Bulb Size Table
| Headlight Type | Bulb Size |
|---|---|
| High Beam | 9005 |
| Low Beam | 9006 |
Steps to Replace Headlight Bulbs
Now that you know the correct headlight bulb size for your 2018 Honda Rancher 420, let’s go through the steps to replace the bulbs:
1. Park your ATV on a flat surface and turn off the engine. Make sure the headlights are also turned off.
2. Locate the headlight assembly on the front of your Rancher 420. It is typically covered by a clear plastic lens.
3. Carefully remove the screws or clips that secure the headlight assembly to the ATV’s frame. Set them aside in a safe place.
4. Gently pull the headlight assembly forward to access the back of the bulb.
5. Twist the bulb socket counterclockwise to remove it from the assembly.
6. Disconnect the electrical connector from the bulb socket by gently pulling it apart.
7. Remove the old bulb from the socket by pulling it straight out.
8. Insert the new bulb into the socket, making sure it is securely in place.
9. Reconnect the electrical connector to the bulb socket.
10. Insert the bulb socket back into the headlight assembly and twist it clockwise to secure it.
11. Carefully reattach the headlight assembly to the ATV’s frame using the screws or clips you removed earlier.
12. Repeat the above steps for the other headlight if necessary.
13. Once both bulbs are replaced, turn on the headlights to ensure they are functioning correctly.
14. If everything is working properly, you can now enjoy a well-lit ride on your 2018 Honda Rancher 420.
Conclusion
Knowing the correct headlight bulb size for your 2018 Honda Rancher 420 is essential when it comes to replacing them. By following the steps outlined in this article and referring to the provided table, you can easily replace the headlight bulbs and ensure optimal visibility during nighttime rides. Remember to always consult the owner’s manual or seek professional assistance if you have any doubts or concerns. Stay safe and enjoy your ATV adventures!