2017 Polaris Sportsman 570 Headlight Bulb Size
Introduction
The Polaris Sportsman 570 is a popular all-terrain vehicle (ATV) known for its versatility and performance. One important aspect of any vehicle is its headlights, as they ensure safe visibility during nighttime rides or in low-light conditions. If you are looking to replace the headlight bulbs on your 2017 Polaris Sportsman 570, it is crucial to know the correct bulb size to ensure compatibility and proper functioning. In this article, we will provide you with the necessary information regarding the headlight bulb size for the 2017 Polaris Sportsman 570.
Headlight Bulb Size Table
To make things easier for you, here is a table listing the headlight bulb size for the 2017 Polaris Sportsman 570:
| Headlight | Bulb Size |
|---|---|
| Low Beam | HB3 (9005) |
| High Beam | H11 |
Understanding the Bulb Sizes
It is essential to understand the different bulb sizes to ensure you purchase the correct replacement for your 2017 Polaris Sportsman 570.
– HB3 (9005): This bulb size is used for the low beam headlights. The HB3 (9005) bulb is a halogen bulb commonly found in many vehicles. It provides a bright and focused beam of light, ensuring good visibility while driving.
– H11: The H11 bulb size is used for the high beam headlights. Similar to the HB3 (9005), the H11 bulb is also a halogen bulb. It produces a powerful and concentrated beam of light, allowing for enhanced visibility during nighttime rides or in dark areas.
Replacing the Headlight Bulbs
Now that you know the correct headlight bulb sizes for your 2017 Polaris Sportsman 570, here are the steps to replace them:
1. Start by turning off the ATV’s engine and removing the key from the ignition to ensure safety.
2. Locate the headlight assembly on the front of the ATV.
3. Depending on the specific model, you may need to remove a protective cover or grille to access the headlight bulbs.
4. Carefully disconnect the electrical connector from the back of the bulb.
5. Remove the old bulb by twisting it counterclockwise and pulling it out.
6. Insert the new bulb into the socket, ensuring it is properly aligned.
7. Twist the new bulb clockwise to secure it in place.
8. Reconnect the electrical connector to the back of the bulb.
9. If you had removed any protective covers or grilles, reattach them securely.
10. Repeat the above steps for the other headlight bulb, if necessary.
11. Once both bulbs are replaced, turn on the ATV’s engine and test the headlights to ensure they are working correctly.
Conclusion
Knowing the correct headlight bulb size for your 2017 Polaris Sportsman 570 is crucial when it comes to replacing them. By referring to the table provided and following the steps outlined, you can easily replace the headlight bulbs and ensure optimal visibility during your ATV rides. Remember to exercise caution and prioritize safety while working on your vehicle.