2017 Mazda 3 Headlight Bulb Size
Introduction
The 2017 Mazda 3 is a popular compact car known for its stylish design, excellent performance, and advanced features. One crucial component of any vehicle is its headlights, which ensure visibility and safety while driving. If you are looking to replace the headlight bulbs in your 2017 Mazda 3, it is essential to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the necessary information regarding the headlight bulb size for the 2017 Mazda 3.
Headlight Bulb Size Table
To make it easier for you to find the correct headlight bulb size for your 2017 Mazda 3, we have compiled a table below:
| Headlight Type | Bulb Size |
|---|---|
| Low Beam | H11 |
| High Beam | 9005 |
| Front Turn Signal | 7440A |
| Front Side Marker | 2825 |
| Front Parking Light | 2825 |
Steps to Replace Headlight Bulbs
If you need to replace the headlight bulbs in your 2017 Mazda 3, follow these steps:
1. Park your vehicle on a flat surface and turn off the engine. Engage the parking brake for added safety.
2. Open the hood of your Mazda 3 and locate the back of the headlight assembly.
3. Depending on the specific bulb you need to replace, twist off the corresponding bulb socket counterclockwise to remove it from the assembly.
4. Carefully disconnect the electrical connector from the bulb socket.
5. Remove the old bulb from the socket by gently pulling it straight out.
6. Insert the new bulb into the socket, making sure not to touch the glass part of the bulb with your bare hands. If you do touch it, clean it with rubbing alcohol before installation.
7. Reconnect the electrical connector to the bulb socket.
8. Align the tabs on the bulb socket with the slots on the headlight assembly and twist it clockwise to secure it in place.
9. Repeat the steps for any other bulbs you need to replace.
10. Close the hood of your Mazda 3 and test the headlights to ensure they are working correctly.
Conclusion
Knowing the correct headlight bulb size for your 2017 Mazda 3 is essential when it comes to replacing them. By referring to the table provided in this article, you can easily find the appropriate bulb size for each headlight type. Remember to follow the steps mentioned above to safely replace the bulbs and ensure optimal visibility while driving your Mazda 3.