Introduction
When it comes to replacing a headlight bulb in your 2016 Ford Transit Connect, it’s important to know the correct bulb size to ensure a proper fit and optimal performance. This article will provide you with the necessary information to determine the right headlight bulb size for your vehicle.
Headlight Bulb Size Chart
Below is a table that lists the headlight bulb sizes for the 2016 Ford Transit Connect:
| Headlight Bulb | Size |
|---|---|
| Low Beam | H11 |
| High Beam | H1 |
Steps to Replace Headlight Bulbs
Step 1: Prepare
Make sure the vehicle is turned off and the headlights are cool to the touch before attempting to replace the bulbs.
Step 2: Access the Bulbs
Open the hood of your Ford Transit Connect and locate the back of the headlight assembly. You may need to remove any covers or protective caps to access the bulbs.
Step 3: Remove the Bulb
Depending on the specific model of your Transit Connect, you may need to twist the bulb socket counterclockwise or release a retaining clip to remove the bulb. Carefully disconnect the electrical connector from the bulb.
Step 4: Install the New Bulb
Take the new headlight bulb, making sure not to touch the glass portion with your bare hands, as the oils from your skin can cause the bulb to burn out prematurely. Align the tabs on the bulb with the slots in the socket and insert it. Twist the bulb clockwise or secure it with the retaining clip, depending on your vehicle’s design.
Step 5: Reconnect the Electrical Connector
Reattach the electrical connector to the new bulb, ensuring a secure connection.
Step 6: Test the Headlights
Turn on your headlights to verify that the new bulbs are functioning correctly. If they do not illuminate, double-check the installation and connections.
Conclusion
Knowing the correct headlight bulb size for your 2016 Ford Transit Connect is crucial for maintaining proper visibility on the road. Refer to the provided table and follow the steps outlined above to successfully replace your headlight bulbs. If you are unsure or uncomfortable with performing this task yourself, it is recommended to consult a professional mechanic.