2014 WRX Headlight Bulb Size: A Comprehensive Guide
Introduction
The 2014 Subaru WRX is a popular sports sedan known for its powerful performance and sleek design. One crucial aspect of any vehicle’s lighting system is the headlight bulbs. If you are looking to replace the headlight bulbs in your 2014 WRX, it is essential to know the correct bulb size to ensure a proper fit and optimal visibility. In this article, we will provide you with a comprehensive guide on the headlight bulb size for the 2014 WRX.
Headlight Bulb Size Table
To make your search for the correct headlight bulb size easier, refer to the table below:
| Headlight Type | Bulb Size |
|---|---|
| Low Beam | H11 |
| High Beam | 9005 |
| Front Turn Signal | 7440A |
| Front Side Marker | 168 |
| Front Parking Light | 168 |
| Front Fog Light | H11 |
Step-by-Step Guide to Replacing Headlight Bulbs
If you are unsure about how to replace the headlight bulbs in your 2014 WRX, follow these simple steps:
1. Open the hood of your vehicle and locate the back of the headlight assembly.
2. Twist and remove the headlight bulb cover, usually a plastic cap, by turning it counterclockwise.
3. Disconnect the electrical connector from the back of the bulb by gently pulling it away.
4. Remove the old bulb by twisting it counterclockwise and pulling it out.
5. Insert the new bulb into the socket and twist it clockwise to secure it in place.
6. Reconnect the electrical connector to the new bulb.
7. Replace the headlight bulb cover by twisting it clockwise until it locks into place.
8. Repeat the above steps for the other headlight bulb if necessary.
9. Close the hood of your vehicle and test the headlights to ensure they are functioning correctly.
Conclusion
Knowing the correct headlight bulb size for your 2014 WRX is crucial when it comes to replacing them. By referring to the table provided and following the step-by-step guide, you can easily replace the headlight bulbs and ensure optimal visibility while driving your Subaru WRX. Remember to always consult your vehicle’s manual or seek professional assistance if you are unsure or uncomfortable performing the replacement yourself.