2013 Ford Taurus SEL Headlight Bulb Size: A Guide to Replacement

2013 Ford Taurus SEL Headlight Bulb Size

Introduction

The Ford Taurus SEL is a popular sedan known for its sleek design and powerful performance. One crucial aspect of any vehicle is its headlights, which ensure optimal visibility and safety while driving. If you are looking to replace the headlight bulbs in your 2013 Ford Taurus SEL, it is essential to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the necessary information regarding the headlight bulb size for your Ford Taurus SEL.

Headlight Bulb Size

To determine the correct headlight bulb size for your 2013 Ford Taurus SEL, you can refer to the owner’s manual or consult a trusted automotive parts store. However, to make it easier for you, we have compiled a table below that lists the headlight bulb size for both the low beam and high beam headlights.

Headlight Bulb Size Table

Headlight Type Bulb Size
Low Beam H11
High Beam 9005

Steps to Replace Headlight Bulbs

If you need to replace the headlight bulbs in your 2013 Ford Taurus SEL, follow these steps:

1. Park your vehicle on a flat surface and turn off the engine. Engage the parking brake for added safety.
2. Open the hood of your car and locate the back of the headlight assembly.
3. Depending on the specific model, you may need to remove the headlight assembly cover or unplug any electrical connectors before accessing the bulb.
4. Once you have clear access to the bulb, carefully remove the old bulb by twisting it counterclockwise and pulling it out.
5. Take the new headlight bulb, making sure not to touch the glass portion with your bare hands, as the oils from your skin can damage the bulb. If you accidentally touch the bulb, clean it with rubbing alcohol before installing it.
6. Insert the new bulb into the headlight assembly and twist it clockwise to secure it in place.
7. Reattach any electrical connectors or headlight assembly covers that were removed earlier.
8. Repeat the steps for the other headlight bulb if necessary.
9. Close the hood of your vehicle and test the new bulbs by turning on the headlights.

Conclusion

Knowing the correct headlight bulb size for your 2013 Ford Taurus SEL is crucial when it comes to replacing them. By referring to the table provided in this article and following the steps outlined, you can easily replace the headlight bulbs and ensure optimal visibility while driving your Ford Taurus SEL. Remember to exercise caution and consult your owner’s manual or a professional if you encounter any difficulties during the process.

Leave a Reply