2013 Ford Expedition Headlight Bulb Size
When it comes to replacing a headlight bulb in your 2013 Ford Expedition, it is essential to know the correct bulb size to ensure a proper fit and optimal performance. In this article, we will provide you with the necessary information on the headlight bulb size for your vehicle.
Headlight Bulb Size Table
| Headlight Bulb Type | Size |
|---|---|
| Low Beam | H13 |
| High Beam | H13 |
| Front Turn Signal | 3157NA |
| Parking Light | 3157NA |
| Side Marker | 194 |
Now that you have the headlight bulb sizes for your 2013 Ford Expedition, let’s go through the steps to replace them.
Replacing Headlight Bulbs
- Open the hood of your Ford Expedition and locate the back of the headlight assembly.
- Disconnect the electrical connector from the bulb by gently pulling it away.
- Remove the rubber dust cover by twisting it counterclockwise.
- Unclip the metal retaining clip that holds the bulb in place.
- Carefully remove the old bulb from the socket.
- Insert the new bulb into the socket, making sure it is securely seated.
- Reattach the metal retaining clip to hold the bulb in place.
- Replace the rubber dust cover by twisting it clockwise.
- Reconnect the electrical connector to the new bulb.
- Repeat the above steps for the other headlight bulb if necessary.
- Close the hood and test the headlights to ensure they are working correctly.
It is important to note that headlight bulb replacement procedures may vary slightly depending on the specific model and trim level of your Ford Expedition. Always consult your vehicle’s owner’s manual for detailed instructions and safety precautions.
By following these steps and using the correct headlight bulb size, you can ensure optimal visibility and safety while driving your 2013 Ford Expedition.