2010 Cadillac SRX Headlight Bulb Size: A Guide to Proper Replacement

2010 Cadillac SRX Headlight Bulb Size

Introduction

The 2010 Cadillac SRX is a luxury crossover SUV that offers a combination of style, comfort, and performance. One important aspect of any vehicle is its headlights, as they play a crucial role in ensuring visibility and safety while driving. If you are looking to replace the headlight bulbs in your 2010 Cadillac SRX, it is essential to know the correct bulb size to ensure a proper fit and optimal performance.

Headlight Bulb Size

To determine the correct headlight bulb size for your 2010 Cadillac SRX, you can refer to the vehicle’s owner’s manual or consult a trusted automotive parts store. However, we have compiled a table below for your convenience:

Headlight Bulb Type Size
Low Beam H11
High Beam 9005
Front Turn Signal 7444NA
Front Side Marker 194
Front Parking Light 194
Front Fog Light H11

Steps to Replace Headlight Bulbs

If you are planning to replace the headlight bulbs in your 2010 Cadillac SRX yourself, here is a step-by-step guide:

1. Park your vehicle on a flat surface and turn off the engine. Engage the parking brake for added safety.
2. Open the hood of your Cadillac SRX and locate the headlight assembly that needs bulb replacement.
3. Depending on the specific bulb you need to replace, you may need to remove the dust cover or access panel at the rear of the headlight assembly.
4. Carefully disconnect the electrical connector from the back of the bulb by gently pressing the release tab and pulling it off.
5. Remove the old bulb by twisting it counterclockwise and pulling it out.
6. Insert the new bulb into the socket, making sure it is properly aligned.
7. Twist the new bulb clockwise to secure it in place.
8. Reconnect the electrical connector to the back of the bulb until it clicks into place.
9. If you had removed a dust cover or access panel, reattach it securely.
10. Repeat the above steps for any other headlight bulbs that need replacement.
11. Close the hood of your Cadillac SRX and test the new bulbs by turning on the headlights.

Conclusion

Knowing the correct headlight bulb size for your 2010 Cadillac SRX is essential when it comes to replacing them. By referring to the table provided or consulting your owner’s manual, you can easily find the appropriate bulb size for each headlight function. Following the step-by-step guide, you can also replace the bulbs yourself, saving time and money. Remember to exercise caution and ensure the bulbs are securely installed for optimal performance and safety while driving.

Leave a Reply