2010 Cadillac CTS Headlight Bulb Size
Introduction
The 2010 Cadillac CTS is a luxury sedan that offers a sleek design and impressive performance. One important component of any vehicle is its headlights, which ensure visibility and safety while driving. If you need to replace the headlight bulb in your 2010 Cadillac CTS, it is essential to know the correct bulb size to ensure a proper fit. In this article, we will provide you with the necessary information regarding the headlight bulb size for the 2010 Cadillac CTS.
Headlight Bulb Size Table
To make it easier for you to find the correct headlight bulb size for your 2010 Cadillac CTS, we have compiled a table with the necessary information. Please refer to the table below:
Headlight Bulb Type | Headlight Bulb Size |
---|---|
Low Beam | HID D1S |
High Beam | HID D1S |
Front Turn Signal | 7444NA |
Parking Light | 7444NA |
Front Side Marker | 194 |
Steps to Replace Headlight Bulbs
If you need to replace the headlight bulbs in your 2010 Cadillac CTS, follow these steps:
1. Open the hood of your vehicle and locate the back of the headlight assembly.
2. Disconnect the electrical connector from the back of the bulb by gently pressing the release tab and pulling it away.
3. Remove the bulb’s retaining clip by pushing it down and away from the bulb.
4. Carefully remove the old bulb from the headlight assembly.
5. Insert the new bulb into the headlight assembly, making sure it is securely in place.
6. Reattach the retaining clip by pushing it back into position.
7. Connect the electrical connector to the new bulb.
8. Close the hood of your vehicle and test the new headlight bulb to ensure it is working properly.
Conclusion
Knowing the correct headlight bulb size for your 2010 Cadillac CTS is essential when it comes to replacing a burnt-out bulb. By referring to the table provided and following the steps outlined, you can easily replace the headlight bulbs and ensure optimal visibility while driving your Cadillac CTS. Remember to exercise caution and consult your vehicle’s manual if you encounter any difficulties during the replacement process.