2010 BMW 528i Headlight Bulb Size
Introduction
When it comes to maintaining your vehicle’s headlights, knowing the correct bulb size is essential. In this article, we will discuss the headlight bulb size for the 2010 BMW 528i, providing you with the information you need to replace or upgrade your bulbs.
Headlight Bulb Size Table
To make it easier for you to identify the correct headlight bulb size for your 2010 BMW 528i, we have compiled a table below:
| Headlight Bulb Type | Size |
|---|---|
| Low Beam | H7 |
| High Beam | H7 |
| Front Turn Signal | PY21W |
| Parking Light | W5W |
Understanding the Bulb Sizes
Now that we have provided you with the headlight bulb sizes for your 2010 BMW 528i, let’s briefly discuss what each size represents:
– H7: The H7 bulb is a halogen bulb commonly used for both low beam and high beam headlights. It provides a bright and focused light output.
– PY21W: The PY21W bulb is used for the front turn signal lights. It is an amber-colored bulb that provides a clear indication when you activate your turn signals.
– W5W: The W5W bulb, also known as a 194 bulb, is used for the parking lights. It is a small-sized bulb that emits a white light and is commonly found in various automotive applications.
Replacing the Headlight Bulbs
If you need to replace the headlight bulbs in your 2010 BMW 528i, follow these steps:
1. Start by opening the hood of your vehicle and locating the back of the headlight assembly.
2. Locate the electrical connector attached to the back of the bulb you wish to replace. Carefully disconnect the connector by pressing the release tab and pulling it away from the bulb.
3. Once the connector is detached, you can now remove the old bulb by twisting it counterclockwise and pulling it out.
4. Take the new bulb, making sure not to touch the glass portion with your bare hands, as this can cause premature bulb failure. If you accidentally touch the bulb, clean it with rubbing alcohol before installing it.
5. Insert the new bulb into the socket, aligning the tabs, and twist it clockwise to secure it in place.
6. Reconnect the electrical connector to the new bulb by pushing it in until it clicks into place.
7. Repeat the same steps for any other bulbs you need to replace.
8. Finally, test the headlights to ensure they are functioning correctly before closing the hood.
Conclusion
Knowing the correct headlight bulb size for your 2010 BMW 528i is crucial for maintaining optimal visibility on the road. By referring to the table provided and following the steps outlined, you can easily replace or upgrade your headlight bulbs, ensuring a safe and enjoyable driving experience.