2009 Subaru Legacy Headlight Bulb Size
Introduction
The headlights of a vehicle are crucial for safe driving, especially during low-light conditions or at night. If you own a 2009 Subaru Legacy and need to replace a headlight bulb, it’s essential to know the correct bulb size to ensure a proper fit. This article will provide you with the necessary information regarding the headlight bulb size for a 2009 Subaru Legacy.
Headlight Bulb Size Table
To make it easier for you to find the correct headlight bulb size for your 2009 Subaru Legacy, here is a table that lists the bulb sizes for both the low beam and high beam headlights:
| Headlight Type | Bulb Size |
|---|---|
| Low Beam | H7 |
| High Beam | 9005 |
Steps to Replace Headlight Bulbs
If you need to replace a headlight bulb in your 2009 Subaru Legacy, here are the steps to follow:
1. Open the hood of your vehicle and locate the back of the headlight assembly.
2. Disconnect the electrical connector from the back of the bulb by gently pressing the release tab and pulling it away.
3. Remove the rubber dust cover by twisting it counterclockwise.
4. Take note of the bulb’s orientation and remove it by twisting it counterclockwise or pulling it straight out, depending on the specific bulb type.
5. Insert the new bulb into the socket, making sure it is properly aligned.
6. Twist the bulb clockwise to secure it in place.
7. Reinstall the rubber dust cover by twisting it clockwise.
8. Reconnect the electrical connector to the back of the bulb until it clicks into place.
9. Close the hood of your vehicle.
Conclusion
Knowing the correct headlight bulb size for your 2009 Subaru Legacy is essential for maintaining optimal visibility on the road. Refer to the table provided in this article to ensure you purchase the correct bulb size. Additionally, following the steps outlined above will guide you through the process of replacing a headlight bulb in your Subaru Legacy. Remember to exercise caution and consult your vehicle’s manual if you encounter any difficulties during the replacement process.