When it comes to maintaining your vehicle’s headlights, it’s important to know the correct bulb size to ensure proper fitment and functionality. In this article, we will provide you with the headlight bulb size for the 2009 Hyundai Tucson.
Headlight Bulb Size Table
Headlight Type | Bulb Size |
---|---|
Low Beam | H11 |
High Beam | 9005 |
Steps to Replace the Headlight Bulb
Step 1: Prepare
Make sure the vehicle is turned off and the headlights are cool to the touch before starting the replacement process.
Step 2: Access the Headlight Assembly
Open the hood of your 2009 Hyundai Tucson and locate the headlight assembly. It is usually accessible from behind the headlight housing.
Step 3: Remove the Bulb Connector
Disconnect the electrical connector from the back of the headlight bulb by gently pulling it straight out. Be careful not to damage the connector or the wiring.
Step 4: Remove the Old Bulb
Twist the bulb counterclockwise to unlock it from the headlight assembly. Once unlocked, carefully remove the old bulb from the housing.
Step 5: Install the New Bulb
Take the new bulb and align the tabs on the base with the slots in the headlight assembly. Insert the bulb into the housing and twist it clockwise to lock it in place.
Step 6: Reconnect the Bulb Connector
Reattach the electrical connector to the back of the new bulb by pushing it in until it clicks into place.
Step 7: Test the Headlights
Turn on your headlights to ensure that the new bulb is functioning properly. If the light is not working, double-check the installation and connections.
Conclusion
Knowing the correct headlight bulb size for your 2009 Hyundai Tucson is essential for maintaining optimal visibility on the road. By following the steps outlined in this article, you can easily replace the headlight bulb and ensure a safe driving experience.