2005 Subaru Forester Headlight Bulb Size and Replacement Guide

2005 Subaru Forester Headlight Bulb Size

If you own a 2005 Subaru Forester and are in need of replacing your headlight bulbs, it’s important to know the correct bulb size to ensure a proper fit and optimal performance. This article will provide you with the necessary information regarding the headlight bulb size for your vehicle.

Headlight Bulb Size Table

Headlight Bulb Type Size
Low Beam H7
High Beam 9005

As shown in the table above, the 2005 Subaru Forester uses an H7 bulb for the low beam headlights and a 9005 bulb for the high beam headlights. It’s crucial to use the correct bulb size to ensure proper illumination and compatibility with your vehicle’s electrical system.

Steps to Replace Headlight Bulbs

Here are the steps to replace the headlight bulbs in your 2005 Subaru Forester:

  1. Open the hood of your vehicle and locate the back of the headlight assembly.
  2. Remove the rubber dust cover by twisting it counterclockwise.
  3. Disconnect the electrical connector from the back of the bulb by gently pulling it off.
  4. Unclip the metal retaining clip that holds the bulb in place.
  5. Carefully remove the old bulb from the headlight assembly.
  6. Insert the new bulb into the headlight assembly, making sure it is securely seated.
  7. Reattach the metal retaining clip to hold the bulb in place.
  8. Reconnect the electrical connector to the back of the bulb.
  9. Replace the rubber dust cover by twisting it clockwise.
  10. Repeat the above steps for the other headlight bulb if necessary.
  11. Close the hood of your vehicle.

It’s important to handle the new bulb with care and avoid touching the glass portion, as oils from your skin can cause hot spots and reduce the lifespan of the bulb. If you accidentally touch the bulb, clean it with rubbing alcohol before installation.

By following these steps and using the correct headlight bulb size, you can ensure proper visibility and safety while driving your 2005 Subaru Forester. Remember to always consult your vehicle’s owner’s manual or a certified Subaru technician for specific instructions and recommendations.

Leave a Reply